Up-and-down Pouring Device
The up-and-down pouring device is a key unit of the AAC block pouring machine. It comprises pouring nozzle, lifting arm, and air compressor cylinder. It is mounted below the pouring mixer and is connected with the PLC control system.
After mixing, the obtained slurry will be poured into the empty moulds. The number of big air bubbles in the mould is reduced and the AAC pouring area could be kept clean. In addition, due to the adopting of up-and-down pouring device, the oil layer on the inner wall of the mould can be prevented to a large degree, thus the green cake won’t stick to the mould when being turning over.
Get In Touch
Jiangsu Teeyer Intelligent Equipment Co., Ltd. is a high-tech enterprise specialized in building materials equipment designing, R&D, manufacturing, project management and integration of operation & maintenance. The main product of TEEYER is the whole line equipment for AAC block and panel production. TEEYER aims to provide customers with satisfactory overall solution for wall material products.
Located in High-tech Zone, Changzhou City, TEEYER Company set up in the year of 1989, with 160.7 million yuan registered capital, 143,000 square meters covering area, and over 400 employees, among them more than 80 administrative staff and senior R&D technicians.
-
- Cross Cutting MachineFollowed by horizontal cutting, it is cross cutting area. The cake will be cut in vertical as required value.
-
- Vertical Cutting MachineAfter side cutting area, it is horizontal cutting. The horizontal cutting machine will cut the cake into several layers according to the set value.
-
- Cutting CarThe AAC cutting car system works around the cutting station. It consists of a cutting car, pinion and rack moving rail. In the cutting section...
-
- Tongue and Groove Milling DeviceCutting cart carries side plate and cake to the tongue & groove area, to cutting the cake both two sides. Generally...
-
- Vacuum Suction HoodThe vacuum suction hood is used to clean the waste produced during the AAC production. It is mounted on the vertical cutting machine...